AEQ FORUM
Digital audio mixer for broadcast applications
65
• “Remote ON/OFF”: allows you to select a GPI (from the list defined in chapter 4.2.1.2)
to perform the remote start function for this channel (Channel ON/OFF keys on control
surface: see paragraph 2.1.1.8 of this manual). “None” indicates there is no Remote
ON/OFF function associated to that channel.
• “Solo”: allows you to select a GPI (from the list defined in chapter 4.2.1.2) to remotely
cut the audio of all the microphone inputs that have been defined except the one that
has been associated with the SOLO function”. This is useful when for example multiple
microphones are used for the invited guests and the moderator needs to cut all the mics
except his own. This option is only available for microphone channels and is typically
used for the main microphone. “None” indicates there is no SOLO function associated
to that channel.
To Next Page
Loading...
Need help?
General