AGFA CR 10-X Service Manual

DD+DIS155
.11E
Repair and Service
Safety Guidelines / General Repair Instruction
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 3.1 / Page 4 of 11
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
1 Intended Use
The digitizer is part of a CR system, further containing a cassette, image plate and
modality workstation. The CR system is used in a radiological environment by qualified
staff to read-out, process and route static X-ray radiographic images.
The cassette is used to protect the image plate from light and damages during X-ray
exposure, transport and handling.
The image plate is used to capture the static X-ray radiographic images; the image
plate is scanned by the digitizer.
The digitizer is used to scan an X-ray exposed Image Plate; it results into a digital
image which is sent to the dedicated workstation.
The modality workstation is used to process and route the digital images from the
digitizer.
2 Labels in and on the Device
2.1 Labels in the Rear
On the rear cover of the digitizer following labels are available:
 Type Label
 User safety related labels
 Certification related labels
For the meaning of the different labels refer to the user manual.

AGFA CR 10-X Specifications

General

Brand	AGFA
Model	CR 10-X
Category	Medical Equipment
Language	English