AGFA CR 10-X Service Manual

DD+DIS155
.11E
Repair and Service
Tools and auxiliary Means
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 7 of 31
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
Overview of the CR 10-X / CR 12-X service user interface menus:
Menu See Section
Logout 2.1
General Info
Device Info 2.2.1
Network Info 2.2.2
Reporting
Info Counter 2.3.1
Error Statistics 2.3.2
Service Activity Logfile 2.3.3
Install & Configure
Software Installation 2.4.1
Digitizer Settings 2.4.2
Destination Settings 2.4.3
Site Specific Data 2.4.4
Installation Wizard 2.4.5
Error Viewer Installation 2.4.6
Log Settings 2.4.7
Diagnose & Repair
Error Code Explanation 2.5.1
Device Test 2.5.2
Diagnose Cycle 2.5.3
Endurance Run Cycle 2.5.4
PMT High Voltage on/off 2.5.5
Reset Relative Counters 2.5.6
Clear Image Queue* 2.5.7
Maintain & Calibrate
Shading Calibration 2.6.1
Backup / Restore
Backup 2.7.1
Restore 2.7.2
*Menu “Clear Image Queue” available as of software ARC_1404 only.

AGFA CR 10-X Specifications

General

Brand	AGFA
Model	CR 10-X
Category	Medical Equipment
Language	English