AGFA CR 10-X Service Manual

DD+DIS155
.11E
Functional Description
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
1 The Digitizer System in a Nutshell
1.1 System Overview
515100ab.cdr
Digitizer
Cassette
NX Workstation
The digitizer is part of the CR system,
consisting of:
 Digitizer
 Cassette(s) with Image Plate,
CR MD 1.0 General,
format 35 x 43 cm
 NX Workstation as of software
version 2.0.8700 / 3.0.8700
(subtypes 100 and 110) or
2.0.8800 / 3.0.8800 (subtypes 200
and 210).
Figure 1
OK
NOT OK
NOT OK
515100af.cdr
 One Processing Station and one
digitizer always belong together.
Figure 2
NOTE:
The digitizer can also be connected to other workstations.
Prerequisite: The workstation needs to support the Agfa proprietary DICOM protocol for
image acquisition. Example for such a workstation: Agfa SE 2.0 Standalone.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 2 / Page 4 of 19
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential

AGFA CR 10-X Specifications

General

Brand	AGFA
Model	CR 10-X
Category	Medical Equipment
Language	English