DD+DIS170
.11E
Installation Planning
Checklist
123
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
10 Installation Planning Checklist
10.1 Installation Planning Checklist
NOTE:
For AGFA employees only: Book the pre-installation tasks under task code "PRI".
# Step Goal Section OK
1. Ask the Agfa sales
representative for a
contact person in the site.
To schedule an installation date
with the customer.
To get the list of ordered equipment
that needs to be installed.
To have a contact person for
checking the requirements for the
installation site.
-
2. Make yourself familiar
with the system overview
and the system workflow.
To see in which environment the
digitizer will be installed. 1
3. Make yourself familiar
with the scope of delivery
and accessories.
Basic information, to see whether
additional, site specific material for
installation might be required.
2
4. Make yourself familiar
with the installation site
size requirements.
To see whether the planned
installation site fits to the size of the
digitizer.
3
5. Check the documents
and parameters that are
required for system
integration.
To have all documents and data
available which are required for
system integration.
4
6. Pass the required
ambient conditions to the
customer and the
forwarder.
To ensure that the transport,
storage and operating conditions
meet the requirements.
5
7. Check the required
electrical connection.
To ensure that the required outlets
and required cables are available.
6
8. Check the digitizer
dimensions.
To ensure transport path and
installation site correspond to the
required size.
7
9. Pass the specifications
and safety standards to
the customer.
To inform the customer about
technical details of the product. 8 and 9
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 23 of 24
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
To Next Page
Loading...
Need help?
General
