AGFA CR 10-X Service Manual

DD+DIS155
.11E
Repair and Service
Software Releases and Patches
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
6 Software Release ARC_1404
Release Date
04/2013
Software ARC_1404 is installed in following digitizers ex
factory.
Type SNs
5151/100
SN ≥ 2.500 and additionally in SN 2.342
and 2.497
5151/110 SN ≥ 20.001
5151/200 SN ≥ 30.001
Digitizer SNs
5151/210 SN ≥ 40.001
Availability
 Agfa HealthCare Library*
 USB flash drive, delivered with the digitizer
Prerequisites
The NX workstation connected to the digitizer requires:
 For type 5151/100 and 110 software ≥ NX 2.0.8700 /
3.0.8700.
 For type 5151/200 and 210 software ≥ NX 2.0.8800 /
3.0.8800.
For additional system component compatibility
information refer to following documents:
 Solution Structure Data Document, Document ID*
30781759 (Intranet Link
/ Extranet Link)
 CR/DR Interoperability Matrix, Document ID*
31333326 (Intranet Link
/ Extranet Link)
Reference Document
DD+DIS084.13E, Service Bulletin No. 10, Software
ARC_1404 available (Intranet Link
/ Extranet Link)
* On the Agfa HealthCare Library only the latest software release can be downloaded.
NOTE:
Software ARC_1404 is the first software which supports also the three digitizer
subtypes 110, 200 and 210 that were introduced in 04-2013.
Edition 1, Revision 3 CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.8 / Page 11 of 13
04-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential

AGFA CR 10-X Specifications

General

Brand	AGFA
Model	CR 10-X
Category	Medical Equipment
Language	English