AGFA CR 10-X Service Manual

DD+DIS170
.11E
Installation Planning
123
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 9 of 24
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
2.2 Accessories
The following accessories are available for the digitizer:
Item ABC Code Comment
Cassette set with Image
Plate "CR MD 1.0
General", 35x43 cm
(Genrad & FLFS)
5R3GU Number of cassettes / image plates are
depending on the individual order
CR Full Body Cassette
Holder
EAUGV
Optional CR Anti-scatter
grid version 2
EMUXJ
Optional CR EasyLift EJ8V8
Required for Full Leg / Full Spine option
only
UPS Powerware 5115,
120 V Version
EGPSE
UPS Powerware 5115,
220 V Version
EGPTG
Can be used for digitizer and NX.
For technical specifications refer to
section 8.
Mobile Kit for CR 10-X Refer to
marketing
information
To be used in earthquake areas and in
mobile usage. May not be used in military
vessels.
Monitors and PC
Hardware
See
comment
The released monitors and PC hardware is
listed in following document on the Agfa
HealthCare Library:
CR/DR Interoperability Matrix, Document
ID 31333326 (Intranet Link
/ Extranet Link).
For sales ABC codes refer to the relevant
sales information.
NX Licenses See
comment
The available NX licenses are published on
the Agfa HealthCare Library. Example
document: Licensing NX 8700, Document
ID 38260259 (Intranet Link
/ Extranet Link)
Remote Service Not
applicable
In general it is possible to diagnose and
repair the digitizer to a certain extent
remotely. Remote Access is established via
the Agfa own Secure Remote Service
System (SRSS). For more information to
the SRSS see Agfa HealthCare Library*:
<Technical Services  Service
Delivery  SRSS>

AGFA CR 10-X Specifications

General

Brand	AGFA
Model	CR 10-X
Category	Medical Equipment
Language	English