AGFA CR 10-X Service Manual

DD+DIS170
.11E
Installation Planning
123
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader Chapter 11 / Page 21 of 24
03-2013 Type 5151 / 100 / 110 / 200 / 210 Agfa Company Confidential
8.8 Interface Data
Interface to NX workstation
Via Ethernet 10/100 Base Ethernet
(auto-negotiate)*
* Gigabit Ethernet is not supported.
8.9 Service Data
Info counter
Yes
Error diagnostics built in
Yes
Remote / preventive service capable
Yes
8.10 Functional Data Image Plates
Image plate type
CR MD1.0
Image retention
Within 1 hour Recommended readout time
After 2 hours 70 % of the stored energy is still present with
no visible loss of information upon readout.
After 24 hours Image retention still exceeds 45 %.
Slightly reduced image quality
Image plate Usage
Image plate expires after 5 years
9 Safety Standards
The digitizer complies with:
North American Standards
Federal Communications Commission
Canadian Standards Association
Underwriters Laboratories
Code of Federal Regulations
European Norm and International
Standards
European Norm
International Electrotechnical Commission
EMC*
 CSA 22.2 No. 601.1.2
 FCC part 15
 EN 60601-1-2:2007
Safety
 UL60601-1:2003
 CSA C 22.2 No. 601.1:1990 +
S1:1994 + A2:1998
 CFR parts 1040.10 and
1040.11
 CSA-E60825-1-03
 EN ISO 13485: 2003
 IEC 60601-1:1988 + A1:1991 +
A2:1995
 IEC 60601-1: 2005
 IEC 60825-1: 2007
* EMC = Electromagnetic Compatibility

AGFA CR 10-X Specifications

General

Brand	AGFA
Model	CR 10-X
Category	Medical Equipment
Language	English