Agilent Technologies 1290 Infinity II - 1 Introduction; 2 Site Requirements and Specifications; Physical Specifications; 3 Using the Pump

1290 Infinity II High-Speed Pumps User Manual 3
In This Guide…
This manual covers:
• Agilent 1290 Infinity II High-Speed Pump (G7120A)
• Agilent 1290 Infinity II Bio High-Speed Pump (G7132A)
1Introduction
This chapter gives an introduction to the pump and an instrument overview.
2 Site Requirements and Specifications
This chapter provides information on environmental requirements, physical and
performance specifications.
3Using the Pump
This chapter explains the operational parameters of the Agilent 1290 Infinity II
High-Speed Pumps.
4Preparing the Pump
This chapter provides information on how to set up the module for an analysis and
explains the basic settings.
5 Optimizing Performance
This chapter gives hints on how to optimize performance or use additional devices.
6Troubleshooting and Diagnostics
Overview about the troubleshooting and diagnostic features.
7 Error Information
This chapter describes the meaning of error messages, and provides information
on probable causes and suggested actions how to recover from error conditions.