q
Step 3. Check that the Disk Drive assembly can read and write to all sectors of a
flexible disk.
The read/write self test can take up to 40 minutes to complete if there are no
failures.
•
Press the [ READ/WRITE ALL ] softkey.
•
If the self test aborts and displays the message Bad or unformatted media, insert
a new formatted disk and repeat the previous step.
•
If the self test fails a second time, the Disk Drive assembly is probably
faulty.
•
If the self test passes, the Disk Drive assembly and flexible disk are
functioning correctly.
Troubleshooting the Analyzer Agilent 35670A
To troubleshoot disk drive failures
4-58