Agilent 5517B/BL/C/D/DL/FL User’s Guide ix
Contents
Aligning the Optics 56
Making Measurements — An Example 57
Solving Problems 60
7Service
Introduction 62
Unpacking and Inspection 62
Warranty Claims 62
Contacting Agilent Technologies 62
Laser Head Shipment 63
Tagging for Service 63
Packaging for Reshipment 63
Laser Head Troubleshooting 64
Exchange Laser Tube Assemblies 64
Troubleshooting 64
Disassembly Procedures 68
Tools Required 68
To remove the Front Panel and the Cover 69
To remove the A3 Controller/Reference Board 70
To remove the A1 Connector Board 70
To remove the A4 Sampler Board 71
To remove the A5 Laser Tube Assembly and A2 Power Supply 71
8 Specifications
Introduction 74
Calibration cycle 74
Specifications and characteristics 74
Specifications and Characteristics 74
Index
To Next Page
Loading...
