Maintaining Your GC 121
8 Maintaining the MMI
Consumables and Parts for the Multimode Inlet 122
Exploded Parts View of the MMI 124
To Install the Column Nut Adapter 125
To Install a Capillary Column with the Multimode Inlet 126
To Change the Septum on the MMI 130
To Clean the Septum Seat in the Insert Assembly of the MMI 132
To Change the Liner and O-Ring on the MMI 134
To Replace the Filter in the Split Vent Trap for the MMI 137
To Clean the Multimode Inlet 139
To Bakeout Contaminants from the MMI 141
To Next Page
Loading...
