15 Maintaining the FPD+
Consumables and Parts for the FPD+
242 Maintaining Your GC
Consumables and Parts for the FPD+
See the Agilent catalog for consumables and supplies for a more complete listing, or visit the Agilent
Web site for the latest information (www.agilent.com/chem/supplies).
Table 38 FPD supplies
Description Part number/quantity
Sulfur filter 1000-1437
Sulfur filter spacer 19256-20910
Phosphorus filter 19256-80010
Exit tube assembly G3435-60330
O-ring for exit tube assembly 0905-1014
Ignitor 19256-60750
Screw, M3 × 6 mm, T-10 0515-0680
Collet 19256-20690
Column measuring tool G3435-81380
Spring to secure photomultiplier tube 1460-1160
Nut, 1/8-inch, brass, for packed column adapters 5180-4103 (10/pk)
Ferrule, Vespel/graphite, 1/8-inch, for packed column adapters 0100-1332 (10/pk)
Nut, 1/4-inch, brass, for packed column adapters 5180-4105 (10/pk)
Ferrule, Vespel, 1/4-inch, for packed column adapters 5080-8774 (10/pk)
1/8-inch Packed column adapter assembly G3435-81340
1/4-inch Packed column adapter assembly G3435-81330
Preventive maintenance kit, single FPD+ G3435-67000
Preventive maintenance kit, dual FPD+ G3436-67000
Table 39 Nuts, ferrules, and hardware for capillary columns
Column id (mm) Description Typical use Part number/quantity
.530 Ferrule, Vespel/graphite, 0.8-mm id 0.45-mm and 0.53-mm capillary columns 5062-3512 (10/pk)
Ferrule, graphite, 1.0-mm id 0.53-mm capillary columns 5080-8773 (10/pk)
Ferrule, graphite, 0.8-mm id 0.53-mm capillary columns 500-2118 (10/pk)
Column nut, finger-tight (for
0.53-mm columns)
Connect column to inlet or detector 5020-8293
To Next Page
Loading...
Need help?
General
