Agilent Technologies 8890 Maintaining Manual

11 Maintaining the FID
To Install the Optional FID PTFE Chimney Insert
Maintaining Your GC 199
To Install the Optional FID PTFE Chimney Insert
WARNING
Be careful! The detector may be hot enough to cause burns. If the detector is hot, wear
heat-resistant gloves to protect your hands.
1 Light the FID flame.
2 Insert the PTFE chimney into the FID castle.
NOTE
When installed, the PTFE chimney insert prevents ignition.

Agilent Technologies 8890 Specifications

General

Brand	Agilent Technologies
Model	8890
Category	Laboratory Equipment
Language	English