1Introduction
Shipping Instructions
14 Agilent 990 Micro GC User Manual
Shipping Instructions
If your Micro GC must be shipped for any reason, it is very important to always include the power
supply.
Cleaning
To clean the surface of the Micro GC:
1 Switch the Micro GC off.
2 Remove the power cable.
3 Put protection plugs on the sample inlets.
4 Put protection plugs on the column vents.
5 Use a soft brush (not hard or abrasive) to carefully brush away all dust and dirt.
6 Use a soft, clean cloth dampened with mild detergent to clean the outside of the instrument.
• Never clean the inside of the instrument.
• Never use alcohol or thinners to clean the instrument; these chemicals can damage the
case.
• Do not to get water on the electronic components.
• Do not use compressed air to clean the instrument.
Instrument Disposal
When the Micro GC or its parts have reached the end of their useful life, dispose of them in
accordance with the environmental regulations that are applicable in your country.
To Next Page
Loading...
