2 Instrument Overview
Power
Agilent 990 Micro GC User Manual 27
Power
Power source
• 90 to 264 Vac, frequency between 47 to 63 Hz.
• The room power outlet circuit must be exclusively reserved for the instrument(s).
• The network should be properly grounded.
• Installation Category (overvoltage category): II
Power requirements
The Micro GC requires 12 Vdc, 180 W.
Only use the power supply provided with your Micro GC.
This Power Supply, see Figure 12, is tailored to meet the power needs of your Micro GC. See
Table 4 on page 28 for specifications.
Figure 12. Model GST220A12-AG2 (p/n G3588-67024)
To Next Page
Loading...
