ESG-D Series Option H98 Signal Generators Specifications
Manual Supplement 2-3
Uplink
Mode:
Channel or Multicode
Trigger Delay:
–50 to +204 chips
Long Code:
00000000000 to IFFFFFFFFFF hexadecimal
(0 to 2,199,023,255,551 decimal)
Short Code:
Selectable over the full range of available short codes at
each symbol rate.
Channel Mode:
Channel 1, 2 or 3
Channel 1 Setup
Channel Type:
DTCH+ACCH, ACCH
1
, DTCH
1
, DTX
1
, RACH-L, SDCCH,
UPCH
Symbol Rate: 32, 64, 64 voice, 128, 256 ksps
Data: PN9, PN15, or zeros
Data Insertion at: CRC, multiplexing or spreading
Power Control: n up/down, n selectable from 1 to 80
Time Offset: • TSector 0 to 2560 chips
• TSlot 0 to 159 symbols, limited by symbol rate
• TFrame 0 to 15 slots
Phase Polarity: Normal, Invert
Channel 2 or 3 setup (long and short code spreading of selected data)
Symbol Rate: 32, 64, 128, 256 ksps
Data: PN9, PN15, or zeros
Power Level:
± 30 dB with respect to channel 1
Long Code & Short Code: Set independently for each channel
Multicode Mode (generates 3–channel multicode transmission)
Code 1 Setup
Multicode Type: DTCH + ACCH, UPCH
Symbol Rate: 32 ksps, 64 ksps, 128 ksps, 256 ksps
Pilot – TPC Power: 1 to 3
Data: PN9, PN15, or zeros
Power Control: n up/down, n selectable from 1 to 80
Time Offset: • TSector 0 to 2560 chips
• TSlot 0 to 159 symbols, limited by symbol rate
• TFrame 0 to 15 slots
Code 2 or 3 Setup
Short code can be selected over the full range of available
short codes at each symbol rate.
ACP Specifications:
–61 dBc (–63 dBc, amplitude range ≤0 dBm, Option H99)
To Next Page
Loading...
Need help?
General
