ESG-D Series Option H98 Signal Generators Softkey Reference
Wideband CDMA Softkeys
Manual Supplement 4-21
Power
Press this softkey to set the downlink channel’s power relative to the
power of the Perch1 and Perch2 channels.
Softkey Location: Mode > Wideband CDMA > Channel Setup > Power
Range: ±30 dB of Perch1 and Perch2 power setting
Status after Normal Preset: 0.00 dB
SCPI Command and Command Query:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:
POWer <value>
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:POWer?
RACH
Press this softkey to select a Random Access Channel Long (RACH-L)
type for the uplink channel. This selection is only available for an
uplink channel.
Softkey Location:
Mode > Wideband CDMA > Channel Setup > Channel Type >
RACH
SCPI Command and Command Query:
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE
RACH
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE?
SDCCH
Press this softkey to select a Stand-Alone Dedicated Control Channel
(SDCCH) type.
Softkey Location: Mode > Wideband CDMA > Channel Setup > Channel Type >
SDCCH
SCPI Commands and Command Queries:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:TYPE SDCCH
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:TYPE?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE
SDCCH
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE?