ESG-D Series Option H98 Signal Generators Softkey Reference
Wideband CDMA Softkeys
Manual Supplement 4-15
SCPI Commands and Command Queries:
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]|2|3:
LCODe <value>
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]|2|3:LCODe?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:MCOD:LCODe <value>
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:MCOD:LCODe?
Multicode #
Press this softkey and enter a number to activate a multicode channel.
Softkey Location:
Mode > Wideband CDMA > Multicode #
Choices: 1, 2 or 3
Status after Normal Preset: 1
Multicode Type
Press this softkey to select the multicode type.
DTCH+ACCH Sets the multicode type to a Dedicated Traffic Channel
plus an Associated Control Channel.
UPCH Sets the multicode type to a User Packet Traffic
Channel.
Softkey Location: Mode > Wideband CDMA > Channel Setup > Multicode Type
Choices: DTCH+ACCH or UPCH
Status after Normal Preset: DTCH+ACCH
SCPI Command and Command Query:
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:MCOD[1]:TYPE DA|UPCH
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:MCOD[1]:TYPE?