ESG-D Series Option H98 Signal Generators Softkey Reference
Wideband CDMA Softkeys
Manual Supplement 4-5
BCCH Type
Press this softkey to set the downlink channel BCCH type.
Softkey Location:
Mode > Wideband CDMA > Perch Setup >
BCCH Setup >BCCH Type
Choices: 1 or 2
Status after Normal Preset: 1
SCPI Command and Command Query:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:PERCh[1]:BCCH[:TYPE] 1|2
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:PERCh[1]:BCCH[:TYPE]?
Channel #
Press this softkey to set the downlink/uplink channel number.
Softkey Location:
Mode > Wideband CDMA > Channel #
Downlink Choice: 1
Uplink Choices: 1, 2, or 3
Status after Normal Preset: 1
SCPI Commands and Command Queries:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]|2|3
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel?
Channel Setup
Press this softkey to display the Channel Setup menu. From this menu,
you can define channel type and parameters.
Softkey Location: Mode > Wideband CDMA > Channel Setup