Programming Information ESG-D Series Option H98 Signal Generators
Wideband CDMA Subsystem SCPI Command Reference
5-10 Manual Supplement
Channel Type
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:TYPE
DA|ACCH|DTCH|DTX|FACH|SDCCH|UPCH
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:TYPE?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE
DA|ACCH|DTCH|DTX|RACH|SDCCH|UPCH
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE?
Execute this command to select the channel type.
Downlink Channel Types
The following downlink channel types are assigned by appending the
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:TYPE command with one of the
following variables:
ACCH Sets the downlink channel type to an Associated Control Channel (ACCH).
DA Sets the downlink channel type to a Dedicated Traffic Channel plus
Associated Control Channel (DTCH+ACCH).
DTCH Sets the downlink channel type to a Dedicated Traffic Channel (DTCH).
DTX Sets the downlink channel type to a Discontinuous Transmission Channel
(DTX).
FACH Sets the downlink channel type to a Forward Access Channel Long
(FACH-L).
SDCCH Sets the downlink channel type to a Stand-Alone Dedicated Control
Channel (SDCCH).
UPCH Sets the downlink channel type to a User Packet Traffic Channel (UPCH).
Status after *RST: DTCH+ACCH