Agilent Technologies ESG-D Series Manual Supplement

Softkey Reference ESG-D Series Option H98 Signal Generators
Wideband CDMA Softkeys
4-6 Manual Supplement
Channel State Off On
Press this softkey to toggle the operating state of the active channel.
Note that channels cannot be turned off when operating in uplink
multicode mode.
Softkey Location:
Mode > Wideband CDMA > Channel State Off On
Downlink Channel 1 Choices: Off or On
Uplink Channels 1, 2 or 3 Choices: Off or On
Status after Normal Preset: On
SCPI Commands and Command Queries:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1][:STATe]
ON|OFF|1|0
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1][:STATe]?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]|2|3[:STATe]
ON|OFF|1|0
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]|2|3[:STATe]?
Channel Type
Press this softkey to select the channel type.
Downlink Channel Types
The following downlink channel types are assigned by pressing one of
the following softkeys:
ACCH Sets the downlink channel type to an Associated
Control Channel (ACCH).
DTCH+ACCH Sets the downlink channel type to a Dedicated Traffic
Channel plus Associated Control Channel
(DTCH+ACCH).
DTCH Sets the downlink channel type to a Dedicated Traffic
Channel (DTCH).
DTX Sets the downlink channel type to a Discontinuous
Transmission Channel (DTX).
FACH Sets the downlink channel type to a Forward Access
Channel Long (FACH-L).
SDCCH Sets the downlink channel type to a Stand-Alone
Dedicated Control Channel (SDCCH).
UPCH Sets the downlink channel type to a User Packet Traffic
Channel (UPCH).
Status after Normal Preset: DTCH+ACCH

Agilent Technologies ESG-D Series Specifications

General

Brand	Agilent Technologies
Model	ESG-D Series
Category	Portable Generator
Language	English