Agilent Technologies ESG-D Series Manual Supplement

ESG-D Series Option H98 Signal Generators Softkey Reference
Wideband CDMA Softkeys
Manual Supplement 4-7
Uplink Channel Types
In uplink mode, channel type for channels 2 and 3 is set by channel 1,
but each channel can be turned off independently.
The following uplink channel types are assigned by pressing one of the
following softkeys:
ACCH Sets the uplink channel type to an Associated Control
Channel (ACCH).
DTCH+ACCH Sets the uplink channel type to a Dedicated Traffic
Channel plus Associated Control Channel
(DTCH+ACCH).
DTCH Sets the uplink channel type to a Dedicated Traffic
Channel (DTCH).
DTX Sets the uplink channel type to a Discontinuous
Transmission Channel (DTX).
RACH Sets the uplink channel type to a Random Access
Channel Long (RACH-L).
SDCCH Sets the uplink channel type to a Stand-Alone
Dedicated Control Channel (SDCCH).
UPCH Sets the uplink channel type to a User Packet Traffic
Channel (UPCH).
Status after Normal Preset: DTCH+ACCH
Symbol rate is coupled to channel type. Table 4-1 shows actual symbol
rates set as a function of channel type and selected symbol rate.
Illegal combinations are not selectable via the front panel; assignments
via remote commands will default as shown in the following table.

Agilent Technologies ESG-D Series Specifications

General

Brand	Agilent Technologies
Model	ESG-D Series
Category	Portable Generator
Language	English