Softkey Reference ESG-D Series Option H98 Signal Generators
Wideband CDMA Softkeys
4-4 Manual Supplement
256 ksps
Press this softkey to set the symbol rate to 256 kilosymbols per second.
Softkey Location:
Mode > Wideband CDMA > Channel Setup > Symbol Rate >
256 ksps
SCPI Commands and Command Queries:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:SRATe SR256K
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:SRATe?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]|2|3:
SRATe SR256K
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]|2|3:SRATe?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:MCOD[1]:SRATe 256ksps
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:MCOD[1]:SRATe?
ACCH
Press this softkey to set the downlink/uplink channel type to an
Associated Control Channel (ACCH).
Softkey Location: Mode > Wideband CDMA > Channel Setup > Channel Type >
ACCH
SCPI Commands and Command Queries:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:TYPE ACCH
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:TYPE?
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE ACCH
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:TYPE?
BCCH Setup
Press this softkey to display the BCCH (Broadcast Control Channel)
Setup menu. Within this menu you can define:
• BCCH type,
• data pattern,
• System Frame Number setup,
• Tx power bits,
• uplink interference bits, and
• W bits.
Softkey Location:
Mode > Wideband CDMA > Perch Setup > BCCH Setup
To Next Page
Loading...
