Agilent Technologies ESG-D Series Manual Supplement

ESG-D Series Option H98 Signal Generators Softkey Reference
Wideband CDMA Softkeys
Manual Supplement 4-13
Increment
Press this softkey to select an increment System Frame Number format
for the Perch1 channel.
Softkey Location: Mode > Wideband CDMA > Perch Setup > BCCH Setup > SFN
Setup
> System Frame No. > Increment
SCPI Command and Command Query:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:PERCh[1]:
SFNumber[:TYPE] INCR
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:PERCh[1]:
SFNumber[:TYPE]?
Interrupt Trigger
Press this softkey to interrupt downlink channel 1. Channel 1 is
interrupted for the duration specified by the interrupt value. Pressing
the
Interrupt Trigger softkey is equivalent to turning the Channel State Off On
softkey off for the duration of the interrupt value and then back on. The
Interrupt Trigger softkey is available only when the Link Down Up softkey is
set to
Down.
Softkey Location:
Mode > Wideband CDMA > Channel Setup > More (1 of 2) >
Interrupt Trigger
SCPI Command:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:INTerrupt:
TRIGger
Interrupt Value
Press this softkey to change the duration that the Interrupt Trigger
will interrupt downlink channel 1. To enter the interrupt value, rotate
the front-panel knob until the desired value is displayed, use the up
and down arrow keys, or enter the value using the numeric keypad and
press either the
msec or sec terminator softkey.
Softkey Location:
Mode > Wideband CDMA > Channel Setup > More (1 of 2) >
Interrupt Value
Range: 20 milliseconds to 10 seconds, in 20 millisecond steps
Status after Normal Preset: 1.000 seconds
SCPI Command and Command Query:
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:
INTerrupt[:TIMe] <value>
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:
INTerrupt[:TIMe]?

Agilent Technologies ESG-D Series Specifications

General

Brand	Agilent Technologies
Model	ESG-D Series
Category	Portable Generator
Language	English