Agilent Technologies ESG-D Series Manual Supplement

ESG-D Series Option H98 Signal Generators Programming Information
Wideband CDMA Subsystem SCPI Command Reference
Manual Supplement 5-13
Downlink Channel 1 Data Patterns
The following downlink data patterns are assigned by appending the
[:SOURce]:RADio:WCDMa[:BBG]:DLINK:CHANnel[1]:DATA:PATTern command with one of
the following variables:
PN9 Sets the downlink channel 1 data pattern to a 9-bit ITU pseudo-random
bit pattern.
PN15 Sets the downlink channel 1 data pattern to a 15-bit ITU pseudo-random
bit pattern.
ZEROS Sets the downlink channel 1 data pattern to a bit stream of continuous 0’s.
Status after *RST: PN9
Uplink Channel 1 Data Patterns
The following uplink channel 1 data patterns are assigned by appending the
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:CHANnel[1]:DATA:PATTern command with one of
the following variables:
PN9 Sets the uplink channel 1 data pattern to a 9-bit ITU pseudo-random bit
pattern.
PN15 Sets the uplink channel 1 data pattern to a 15-bit ITU pseudo-random bit
pattern.
ZEROS Sets the uplink channel 1 data pattern to a bit stream of continuous 0’s.
Status after *RST: PN9
Uplink Multicode Data Patterns
The following uplink multicode data patterns are assigned by appending the
[:SOURce]:RADio:WCDMa[:BBG]:ULINK:MCOD[1]:DATA:PATTern command with one of the
following variables:
PN9 Sets the uplink multicode data pattern to a 9-bit ITU pseudo-random bit
pattern.
PN15 Sets the uplink multicode data pattern to a 15-bit ITU pseudo-random bit
pattern.
ZEROS Sets the uplink multicode data pattern to a bit stream of continuous 0’s.
Status after *RST: PN9

Agilent Technologies ESG-D Series Specifications

General

Brand	Agilent Technologies
Model	ESG-D Series
Category	Portable Generator
Language	English