ESG-D Series Option H98 Signal Generators Programming Information
Wideband CDMA Subsystem SCPI Command Reference
Manual Supplement 5-27
• long code,
• data insertion,
• transmission power control,
• time offset adjustments (TSector, TFrame, TSlot),
• uplink trigger delay, and
• phase polarity.
Channels 2 and 3 use the same channel type, uplink trigger delay, time
offset adjustments, and phase polarity as channel 1. Channels 2 and 3
include the following selectable parameters:
• operating state,
• symbol rate,
• power (relative to channel 1),
• data pattern, and
• long code.
MCOD Selects multicode as the uplink transmission mode.
In multicode mode, three multicodes are available. Multicode channel 1
includes the following selectable parameters:
• multicode type,
• symbol rate,
• short code,
• pilot-TPC power,
• data pattern,
• long code,
• transmission power control,
• time offset adjustments (TSector, TFrame, TSlot)
• uplink trigger delay, and
• phase polarity.
Multicode channels 2 and 3 use the same parameters as multicode channel
1 with the exception of their short codes, which are individually selectable.
Choices:
CHANnel or MCOD
Status after *RST: Chan
To Next Page
Loading...
