Agilent Technologies Helium Leak Detector
28
DRAFT 12
/11/17
1.2 Unpacking the Leak Detector
The following items are included in the shipment:
❑ Agilent Technologies Helium Mass Spectrometer Leak Detectors Operations Manual
❑ Agilent Technologies leak detector configured and completely assembled as ordered
❑ All necessary power cords, as ordered
❑ Pump manuals (for the purchased configuration)
❑ Any optional equipment ordered
❑ Any manuals for optional equipment purchased
1.2.2 Unpacking, Initial Startup, High Pressure Test Setup, and Shutdown
1.2.2.1 Unpacking
WARNING Unpacking the Leak Detector: Always work in a team of at least
two people. Wear personal protective equipment (PPE),
including gloves, boots, and a weight belt to avoid injury.
1. Remove from Skid
1. Take the entire skid and box to an open area. Remove the shipping straps and pull the
cardboard box straight up, over the leak detector. Save the box and the skid in case you
need to do a return shipment (
Figure 1-3).
Figure 1-3 Remove from Skid
2. Examine the leak detector for damage (whether a mobile unit with cart and wheels,
portable, or benchtop), and remove the remaining shipping straps and top plastic
shower cap cover (
Figure 1-4).
To Next Page
Loading...
Need help?
General
