Agilent Technologies G8610A User Manual

Agilent Technologies Helium Leak Detector
DRAFT 12/11/17
33
Figure 1-12 Mobile Unit Oil Fill
Powering Up
1. Ensure that the roughing pump is switched on and if applicable (IDP-15), set to the
correct voltage setting.
2. Switch the leak detector on, cover the leak detector inlet with a blank-off cap (provided
and already in place), and wait for the screen to read System Ready before operating.

Agilent Technologies G8610A Specifications

General

Brand	Agilent Technologies
Model	G8610A
Category	Measuring Instruments
Language	English