Agilent Technologies Infinity II 1290 User Manual

Agilent 1290 Infinity II Flexible Pump User Manual 213
LAN Configuration
11
Manual Configuration
3 Type
? and press enter to see the available commands.
Figure 40 Telnet Commands
4 To change a parameter follows the style:
• parameter value, for example:
ip 134.40.27.230
Then press [Enter], where parameter refers to the configuration
parameter you are defining, and value refers to the definitions you are
assigning to that parameter. Each parameter entry is followed by a
carriage return.
5 Use the “/” and press Enter to list the current settings.
Tabl e 16 Telnet Commands
Value Description
? displays syntax and descriptions of commands
/ displays current LAN settings
ip <x.x.x.x> sets new ip address
sm <x.x.x.x> sets new subnet mask
gw <x.x.x.x> sets new default gateway
exit exits shell and saves all changes

Agilent Technologies Infinity II 1290 Specifications

General

Brand	Agilent Technologies
Model	Infinity II 1290
Category	Water Pump
Language	English