Agilent Technologies SPS 4 User Manual

Introduction 2
Agilent SPS 4 Autosampler User’s Guide 21
Intended Use
The Agilent SPS 4 is designed to automate the presentation of liquid
samples, drawn from tubes held in racks loaded on the rack location mat,
to the instrument for analysis. The Agilent SPS 4 is controlled through
software commands sent via a USB interface.
The Agilent SPS 4 should only be used within the stated specifications.
CAUTION
If the equipment is used in a manner not specified by Agilent, the protection provided
by the equipment may be impaired.

Agilent Technologies SPS 4 Specifications

General

Brand	Agilent Technologies
Model	SPS 4
Category	Laboratory Equipment
Language	English