Agilent Technologies SPS 4 User Manual

56 Agilent SPS 4 Autosampler User’s Guide
4Operation
2 Run the rinse solution through the wash reservoir and flow path for 5
to 10 minutes.
Once the wash system has been flushed, you can proceed with the
sampling sequence or drain the wash system as part of the shutdown
procedure.
Software Control
All operations of the autosampler can be controlled by commands from
the instrument control software. For details on how the software interface
interacts with the autosampler, consult the relevant section of the manuals
or instrument Help.

Agilent Technologies SPS 4 Specifications

General

Brand	Agilent Technologies
Model	SPS 4
Category	Laboratory Equipment
Language	English