Agilent Technologies SPS 4 User Manual

29
Agilent Technologies
Agilent SPS 4 Autosampler
User’s Guide
3
Installation
Installation Procedure 30
Orientation 30
Bench Requirements 32
Inspection and Unpacking 32
Installing the Cover Kit 34
Fitting the Spill Tray 34
Installing the Rack Location Mat 36
Installing the Wash Reservoir 37
Installing the Standards Rack 39
Installing the Sample Racks 40
Fitting the Sample Probe 42
Fitting the Wash Pump Tubing 44
Connecting the Power and the Communications Cable 48
Confirming the Operation 50
Setting up the Instrument Controlling Software for SPS 4 50
Notes on Lifting the Autosampler 51
The Agilent SPS 4 autosampler is designed to be completely
self- installable. Instructions for setting up the autosampler
are included in this manual. For more information on setting
up the instrument software, refer to the documents provided
with the instrument or the instrument's help.
This chapter provides the installation instructions for the
SPS 4 unit and typical accessories. For other optional
accessories, refer to the installation instructions of the
accessories.

Agilent Technologies SPS 4 Specifications

General

Brand	Agilent Technologies
Model	SPS 4
Category	Laboratory Equipment
Language	English