26 Agilent SPS 4 Autosampler User’s Guide
2 Introduction
Standards rack, 5 wells x φ61 mm (suits LDPE 250 ml bottles)
Standards rack, 34 wells — 12 wells x φ29 mm and 22 wells x φ17 mm
Spill tray
Tube anchor
Peri pump tube 3 bridged 1.3 mm grey/grey 12/pk
Peri pump tube 3 bridged 2.29 mm purple/black 12/pk
Peri pump tube 3 bridged 2.79 mm purple/white 12/pk
Pump tubing Santoprene,3-bridged, 1.3 mm grey/grey, 12/pk
Polyethylene tube 1.5 mm x 0.6 mm
PTFE Tube 2 mm x 3 mm
Tubing, PVC, 8mm x 5mm, 2m
Tubing, 2.5 mm ID, 2 m
Tubing-solvent resistant 0.093-in-ID, 2 m
Tubing-solvent resistant 0.187-in-ID, 2 m
Barb connector 2.5 mm-1.5 mm
Fitting-Barb straight-through 4.8 x 2.4 mm-ID-tubing polypropylene natural
Fitting-Barb straight-through 2.4 mm-ID-tubing polypropylene natural
LDPE Bottle 250 ml Narrow Mouth 250/pk
Polypropylene test tubes, 17 mm OD, 16.5 mL, 1000/pk
Centrifuge, screw capped, 30 mm OD, 50 mL, 500/pk polypropylene
Drainage Tank, polyethylene, 4 liter
Drainage Tank,10 liter
96-well Plates, 0.5 ml, PP 10pk
Table 5 Available options and accessories
Description
To Next Page
Loading...
