71
Agilent Technologies
Agilent SPS 4 Autosampler
User’s Guide
7
Running the Calibration Wizard
Before User Calibration 72
Calibration Wizard Overview 72
Performing User Calibration 74
Error List 79
The sample probe can be displaced from the center after
hitting a sample vial or the sides of the fixed wash reservoir.
User calibration allows for minor adjustments to center the
sample probe. This chapter provides instructions on
performing user calibration for the Agilent SPS 4
autosampler using the Calibration Wizard software.
If centering for the sample probe on your autosampler is
misaligned, refer to Chapter 6, "Troubleshooting".
To Next Page
Loading...
