Appendices A
Agilent SPS 4 Autosampler User’s Guide 95
Default Rinse Materials
To avoid damaging rinse lines, select materials with appropriate chemical
resistance for your application, particularly if you use a rinse solution
other than deionized water.
For your reference, the standard supplied rinse lines contain the following
materials:
Part Material
Polyethylene tube 1.5 mm x 0.6 mm Polyethylene
Peri pump tube Solva, 3 bridged grey/grey 12/pk Polyvinyl chloride (PVC)
Solvaflex (Solva)
Barb connector 2.5mm-1.5mm Polypropylene (PP)
Tubing, 2.5mm ID PVC
Nipple, PP, 2.5mm ID, FWR PP
Single port rinse station PP main part PP
Nipple, PVDF, 5mm ID, FWR Polyvinylidene fluoride
(PVDF)
Tubing, PVC, 8mm x 5mm PVC
To Next Page
Loading...
