VS Series Helium Mass Spectrometer Leak Detectors
DRAFT 4/23/15
xxi
WARNING To avoid injury, wait until the turbo pump is completely
stopped before disconnecting it from the vacuum system.
To vent the turbo, use the system vent function described in
Section 3.1.8.1 “Turbo Vent” on page 3-20.
CAUTION Check the oil level often. Do not allow oil-based mechanical
pumps to run when the oil level is below the LOW mark.
Damage to pumps can occur if operated with no oil, if the oil
level is too high or if the oil has become discolored.
Agilent Services
Agilent offers:
❑ Rebuilt spectrometers on an exchange basis.
❑ NIST-traceable calibrated leak testing and verification services.
❑ Preventive maintenance services.
❑ Overhaul services.
❑ System recertification.
❑ Support agreements.
❑ On-site support.
Please see our catalog or contact us to learn about available services.
Contacting Agilent
In the United States, you can contact Agilent Customer Service at 1-800-882-7426. See the
back cover of this manual for a listing of our sales and service offices.
Visit our web site at:
http://www.chem.agilent.com/en‐US/products‐services/Instruments‐Systems/
Vacuum‐Technologies/Pages/default.aspx
For leak detector support agreements:
http://www.chem.agilent.com/en‐US/products‐services/Services/Vacuum‐Product‐Services/
Extended‐Care/Pages/default.aspx
To Next Page
Loading...
Need help?
General
