Agilent Technologies VS Series User Manual

Name: Agilent Technologies VS Series
Brand: Agilent Technologies
Rating: 4 (1 reviews)

158 pages

To Next Page

To Previous Page

VS Series Helium Mass Spectrometer Leak Detectors

1-20

DRAFT 4/

23/15

HOLD With the leak detector in Test/Fine Test mode, press TEST again and

the leak detector goes into HOLD mode, isolating the leak detector

from the unit under test. The green LED in the Test button won’t

illuminate and the Home Screen displays Hold.

Table of Contents5
Preface11
- Documentation Standards11
- Hazard and Safety Information12
- Agilent Services21
- Contacting Agilent21
Section 1. Introduction to the VS Series Leak Detector23
- The VS Series Leak Detector23
VS Series Leak Detector Configurations and Part Numbers24
Portable Leak Detector with Internal IDP-3 (PD03) Dimensions26
- Mobile Leak Detector with External TS620 Dry Scroll Pump on a Cart, Model VS MD30 Dimensions*27
- Unpacking the Leak Detector28
  - Removing the Leak Detector from the Skid29
- Installation31
Location of Rear Cover Screws33
- Removing the Shipping Bolts: MD/BD30+ and MD/BD1534
Triscroll Shipping Bolt35
Triscroll Shipping Bolt36
- Bench System Installations37
- Recommended Additional Services38
- Storage39
- Front Panel Display and Controls40
Screen Flow43
- Display Panel Controls44
- Rear Panel46
Optional I/O PCB Rear Panel47
- Rear Panel (with Discrete I/O PCB)49
- Features50
Section 2. Operating the Leak Detector53
- Initial Startup, High Pressure Test Setup, and Shutdown53
Helium Background Timer54
- High Pressure Test Set-Up Procedure55
- Shutdown56
- Screens57
On-Screen Icons58
- Home Screen59
Gross Test Screen61
Leak Detector Condition States62
- Control Panel Screen64
Minute Warm-Up Dialog66
Graphical Display67
- Menus Screen68
Calibration Set-Up69
Helium Background Timer70
Reject and Audio Setpoints71
Auto Sequencer75
Leak Rate Ranging77
Range Stop/Sensitivity Requirements78
Transfer Points80
Transfer Points with Stabilization Wait Timer81
System Information82
Control Panel Access84
Section 3. Set-Up85
- Set-Up Menu85
Set-Up Screen - Second86
- Section 3.1.1 "Advanced Parameters87
Manual Valve Control - PD03, MD15, BR15, MD30+, BD30+95
Leak Detector Vacuum System Diagram96
- Output Control97
- Section 3.1.4 "Output Control97
Leak Detector Linear Output Voltage98
- Units99
- Languages100
- Gauge Calibration101
- Section 3.1.7 "Gauge Calibration101
- Maintenance103
- Section 3.1.8.3 "Internal Calibrated Leak103
Vent Turbo Dialog104
- Section 3.1.8.2 "Date & Time Set-Up105
Internal Calibrated Leak106
- Section 3.1.8.3.1 "Cal Leak Expiration Set-Up107
Date Serviced110
- Wireless111
- System Defaults113
Section 4. Maintenance115
Scheduled Maintenance117
Fuses and Circuit Breakers118
- Daily Maintenance119
- Dry Nitrogen Vent119
- Spare Parts List120
Primary Pumps Replacement Parts121
- Leak Detector Accessory Item List122
Appendix A. Communications Protocol123
- Communicating with124
  - Windows Hyperterminal Set-Up Instructions124
  - Printing with Hyperterminal126
- Customer Accessible Inputs and Outputs136
  - Serial Connector136
  - I/O Connector136
    - A-2 Optically Isolated Output Circuit Sketch139
    - A-3 Optically Isolated Input Circuit Sketch140
Appendix B. Introduction to Leak Detection141
- Agilent's Helium Leak Detection Technologies141
- B-1 Magnetic Separation Principle142
- Methods of Leak Testing143
- Typical Leak Detection Applications148
Appendix C. Specifications151

Agilent Technologies VS Series User Manual

Table of Contents

Questions and Answers:

Agilent Technologies VS Series Specifications

Related product manuals

Brand	Agilent Technologies
Model	VS Series
Category	Security Sensors
Language	English