5.6.1.4. Base station marking
Mobile base station needs a base station and a rover.
Turn on the base station - set up the base station - search the Bluetooth of the marking and
connect it - pair the base station - marking
The details are as follows:
A.
Turn on the base station and the rover (long press the power on the key for 3 seconds)
B.
Set up the base station (the base station should be set up in an open place with good signal.
The height of the base station should be more than 3m).
In order to prevent collapse caused by wind and other accidents, the erection shall be firm as far
as possible.
tips:
a.
It is recommended that the user connect the video cable when using the drone to do so, which
will help improve the accuracy and efficiency of the drone and reduce the security risk.
b.
It is recommended that drones be used for empty drones without pesticide to avoid wasting
electricity.
To Next Page
Loading...