10.
Charger
Preface
Thank you for choosing AGR Balanced Charging Power Supply AGR-C6000; this operating
instruction is designed to help you better install and use this product, so before using it, please
read this instruction carefully and keep it properly.
10.1. Precautions
These warnings and safety tips are very important. Improper operation may cause damage to the
charger or other equipment, or even cause electric shock or fire.
1
It is forbidden to use this product in direct sunlight, rain or humid environment.
2
This product should be kept away from heat sources, high-voltage electricity, water, flammable
gases, corrosives and other dangerous materials; it must be used at a suitable ambient
temperature (5°C-45°C is recommended).
3
The product needs to be placed on a water platform, and it is forbidden to tilt or shake; there
must be enough ventilation distance (recommended>50cm) around to ensure that the product is
well ventilated when working.
4
It is forbidden to cover the product radiator or battery with objects during operation; it is also
prohibited to place the battery on the radiator.
5
During operation, the equipment and battery should be placed on a surface with strong
resistance to explosion-proof, flammable and anti-conductor. It is forbidden to place them on car
cushions, carpets or similar objects. Ensure that all inflammable and explosives are kept away
from the operating area.
6
It is forbidden to charge and discharge a battery that has been physically damaged.
7
It is forbidden to unplug the input line during work. After the work is completed, please unplug
the battery in time.
8
If there is foreign matter attached to the metal terminal, please wipe it with a dry towel.
To Next Page
Loading...