AGR A22 2021 - Charger Connection and Operation

9
It is forbidden to modify or disassemble this product by yourself.
10It is forbidden to use this product in thunderstorms.
11 It is forbidden to allow children under 14 years old (including) to use the charger to avoid
accidents.
12Before connecting the battery, it is forbidden to hit the battery, short-circuit the positive and
negative poles of the battery, and forbid disassembling the battery by yourself to avoid danger.
13
When using this product, make sure someone guards it.
14
In case of fire, please use dry powder fire extinguishers correctly. Use of liquid fire
extinguishers may cause electric shock.
10.2. Product Introduction
AGR-C2600 can charge 4 sets of batteries at the same time, with a maximum output power of
2400W. Two modes of charging and maintenance can be selected. The charging current can be
adjusted between slow charging, normal charging and fast charging. It has over-current
protection, over-temperature protection, and shutdown. Line protection, fast equalization,
display status indication and other functions.
The charger AGR-C2600 is highly integrated with the charge butler function. In slow charging
mode, 4CH is charged at the same time. In fast charging mode, the battery is charged in cycles
according to the saturation and higher battery charging sequence. The peak current maximum
charging current can reach 45A ; Normal mode charges two batteries at the same time, the
charging current is automatically and evenly distributed, and the operation is simple.
During use, it can automatically display the operating mode, charging voltage, charging current,
charging time, battery capacity, and single cell voltage of the battery pack.
10.3. Connection instructions
1.
Schematic diagram of AC input connection, connect 100-240v AC to the AGR-2600 charger;