9.
battery
Please check the battery level before use.
When the drone is powered on, gently insert the battery plug back into the drone.
Be sure to use the designated QF14220 smart battery (22000mAh-51.8v)!
The battery turns on automatically when the battery is inserted into the drone, no button is
required to turn on the battery!
9.1. Battery characteristics
1.
This smart battery uses a full metal casing design to avoid battery damage and prolong battery
life.
2.
With automatic shutdown function, if don’t use the battery when it is powered on. It will
automatically shut down after 10 minutes to save power.
3.
You can get real-time battery information, such as voltage, number of cycles, through the AGR
APP.
4.
It has a unique log recording function, which can record and store data during the entire use of
the battery.
5.
You can use a USB cable to connect the computer and the battery to view the battery data and
upgrade the software of the battery.
6.
With charging intelligent alarm function. LED, APP alarm for charging over voltage, over current,
over temperature.
7.
With LED power display function, the battery automatically recognizes the status when
charging or flying without turning on the power; LED displays the remaining power in real time;
8.
Storage self-discharge function. When the battery is not used for a long time, it will
automatically discharge to the storage voltage to ensure the safety of battery storage and extend
the battery life.
9.2. Battery button description
Initial state Key operation functions after key press
Off state Short press Show current battery
Off state Short press button + long
press for more than 2 seconds
The indicator lights in turn, the boot is
complete, and the LED displays the power
Power-on state Short press button + long
press for more than 2 seconds
The lights are off in turn, the battery is off
Off state Long press the button for
more than 5 seconds
Light indicates battery life
To Next Page
Loading...