tips:
No need to power on the drone when copying logs
The log time is London time. If you need to select Beijing time, you should subtract 8 hours to make
the Beijing time log.
7.2. Local log copy (for networkless,
non-Mainland China)
For non-Chinese mainland areas without network, if an accident occurs and log analysis is
required, the user needs to use the “fly control upgrade / log read line” adapted by AGR to
connect the drone and the computer, copy the log and send it to AGR for log Analysis and
locating the cause.
Log copying steps: Open the fuselage cover of the drone——use cross screw to remove the front
cover of central control - connect one end of the wire to the SD card port - plug in the computer
at the other end - open my computer - open central control U disk - Open AGR folder - click logs
folder - select the corresponding log according to the aircraft failure time - copy log - send log to
after-sales - after-sales analyze the cause of failure Because.
8.
8. AGR web management platform
Log in to the management background http://www.agrobot-uav.com to view real-time drone
information, battery statistics data, operation data, flight trajectory and other information.
8.1. Registration and login
There are currently two ways to register via mobile phone number and email.
To Next Page
Loading...