prompt:
After turning off the RTK function, the positioning accuracy and stability of the aircraft will decrease
to a certain extent. Please pay attention to flying safely.
5.18.5. Base station paring
The base station RTK version of the drone is paired with the mobile base station when it leaves
the factory, and the user does not need to perform pairing operations after receiving the drone.
When the base station is changed or the base station signal has not been searched for a long
time and needs to be paired again, the base station pairing operation is required to connect the
RTK on the drone side to the mobile base station.
Pairing operation: set up a mobile base station-turn on the drone-enter more settings-drone
settings-RTK-pair the base station-check the mobile base station ID-enter the base station ID
pairing.
5.18.6. Enable/Disable RTK
The user can choose to turn off and enable the RTK function.
A.
When RTK is enabled, RTK positioning and heading are used for aircraft positioning and
heading. If the RTK fails while the aircraft is flying, the aircraft will automatically enable GPS
positioning and heading functions.
B.
When RTK is turned off, GPS positioning is used for aircraft positioning, and RTK heading is still
used for heading. When the RTK fails, the aircraft automatically activates the GPS heading
function.
5.19. Switch map
Please switch the map after switching the language to avoid deviation between the positioning
and the map position. Generally speaking, Gaode maps are used in China and Google maps are
used in foreign countries.
Open the AG3 APP-click the "execute job" button on the main interface to enter the job
execution interface-click more settings , enter the more settings interface-scroll down to the
bottom and click the other settings button to enter the more settings interface-drop down
Choose to switch between Google Maps and Auto Na-vi Maps.
To Next Page
Loading...