Tips:
a.
The drone cannot be unlocked and the spray cannot be turned on when the UPS is powered on.
b.
If the battery is not plugged in within 60S, the UPS will also stop working and the drone will be
completely powered off.
c.
After performing magnetic compass calibration, accelerometer calibration, and other
operations that require restarting the drone, you need to wait more than 60S, wait for the UPS to
stop working, and plug the battery after the drone is completely powered off, otherwise the restart
will fail!
5.12. Power-off protection UPS function
The drone's motherboard has built-in capacitors. When the drone is unplugged battery, the
motherboard capacitors will continue to supply power to the drone control system and
positioning system for about 60 seconds to ensure the continuous operation of the drone control
system. Ascending time, improve work efficiency.
UPS power supply status: After unplugging the drone battery, the drone tail light
flashes in red, and the APP status bar is red and shows UPS
power supply.
5.13. Auto return function
a.
Return home execution conditions: Each time the user unlocks, the drone will record the
take-off point position as the home point. When the drone returns home automatically, it will
return to the home point and land.
b.
Returning process: Entering returning
——
the
drone
rises
to
the
set
returning
altitude
——
the drone fy to the home point at a maximum speed of 8m / s（If know the stick at this time, the
automatic return will exit） — — reaching the home point— — Hover and wait for the user to
confirm the safety under the drone——Choose to land manually or automatically——adjusting
the drone position——descending altitude——landing and locking.
To Next Page
Loading...