EasyManua.ls Logo

AGR A22 2021 - After-Sales Warranty

AGR A22 2021
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
enter
AC100-180V
Output
max58.8V/50A
AC180-240V
input
power
AC100-180V maximum
output power 1500W
Number of batteries
12/14S
AC180-240V maximum
output power 3000W
Number of
channels
4Ch
Balance accuracy ±20mv
Protection
features
Over-voltage, voltage
limiting, current limiting,
overheating, short circuit,
reverse connection
Working temperature
5-40℃
size
303x150x220mm
weight
≈6.2Kg
10.9. After-sales warranty
Thank you for purchasing the AGR-C2600 charger. AGR will do its best to provide you with
comprehensive after-sales service and fully protect your rights. If your product fails, please
contact the after-sales personnel of AGR.
1.
The warranty expiration date after the product fails is subject to delivery to the AGR After-sales
Service Center;
2.
Due to the quality of the product itself within one year from the date of purchase, the
warranty is free. If the customer cannot provide a valid proof of purchase, the internal date code
will prevail;
3.
For more than one year from the date of purchase, the cost will be charged as appropriate, and
the user must bear the cost of round-trip transportation;
4.
When you send for repair, please be sure to leave your contact information so that you can be
notified in time after repair;
If the product is damaged and cannot be used normally due to the following reasons, it is not
covered by the warranty:
1.
Failure to connect to the correct voltage as required causes damage to the product;
2.
Damage caused by incorrect use not in accordance with the instructions;
3.
All man-made, accidental impact or other force majeure causes product damage;
4.
Unauthorized modification, disassembly or modification of the internal circuit of this product
without the approval of the company;
5.
Water, damp or other foreign matter enters the product and causes damage;
6.
Aging, bumps and scratches on the surface of the product.

Table of Contents