209
Settings and Adjustments
Station programming
4
■ Daily Schedule
Configure the transfer destination and time for each individual day. A schedule one year from the set day can be
configured. Up to 12 schedules can be set for each day.
How to configure Daily Schedule
1. Select the day to configure a schedule from "Calendar."
2. Configure "Transfer to Station Number," "Re-Transfer Destination," "Start Time," and "End Time,"
and click [Add].
3. Click [Update].
Entry Description Settings Default values
Transfer Destination Configure the transfer destination for schedule
transfer. Up to 10 transfer destination stations
can be set. However, if the station making the
outgoing call is IX-MV, IX-DA(-*), or IX-BA, he
transfer will be made only to the station entered
in "#01. IXW-MA cannot be configured as a
transfer destination.
3-32 digits
To configure multiple
stations, enter them
separated with a comma
(,).
Example: 101,102,103,...
-
Re-Transfer Destination Configure the transfer destination when
performing schedule transfer again for a
transferred call. Only a single station can be set
as the transfer destination. However, if the
station making the outgoing call is IX-MV, IX-
DA(-*), or IX-BA, the call will be received without
transferring it again. IXW-MA cannot be
configured as a transfer destination.
3-32 digits -
Start Time Set the Start Time to enable schedule transfer. 00:00 - 23:59 -
End Time Set the End Time to disable schedule transfer. If
this is set earlier than
“Start Time
(→page 209)”, the end time will be for the
following day.
00:00 - 23:59 -
Calendar
Set schedule list
To Next Page
Loading...
Need help?
General
