208
Settings and Adjustments
Station programming
4
How to delete Weekly Schedule
1. Return settings to their initial values, and click [Update].
Entry Description Settings Default values
Transfer Destination Configure the transfer destination for a
scheduled transfer. Up to 10 transfer destination
stations can be configured for each of the 12
schedules, and for each day of the week.
However, if the station making the outgoing call
is an IX-MV, IX-DA(-*), or IX-BA, the transfer will
only be made to the station entered in "#1."
IXW-MA cannot be configured as a transfer
destination.
Per station: 3-32 digits
To configure multiple
stations, enter them
separated with a comma
(,).
Example: 101,102,103,...
-
Re-Transfer Destination Configure the transfer destination when
performing a schedule transfer again for a
transferred call. IXW-MA cannot be configured
as a transfer destination. Only a single station
can be set as the transfer destination. However,
if the station making the outgoing call is IX-MV,
IX-DA(-*), or IX-BA, the call will be received
without transferring it again.
3-32 digits -
Start Time Set the Start Time to enable schedule transfer. 00:00 - 23:59 -
End Time Set the End Time to disable schedule transfer.
If a time earlier than
“Start Time (→page 208)”
is set, the end time will be the time the following
day.
00:00 - 23:59 -
Important
• Do not configure multiple VoIP phones as transfer destinations. If multiple VoIP phones are configured, calls will be transferred
to only one VoIP phone.
To Next Page
Loading...
Need help?
General
