Aiphone IX SERIES - Page 213

213
Settings and Adjustments
Station programming
4
3. When done, click [Update].
How to configure Individual Call
Configure this if "Individual Call" is set in “Function (→page 213)”.
Entry Description Settings Default values
Speed Dial Name Set the Speed Dial Name. 1 - 24 alphanumeric characters
The entire name may not be
shown on this station's screen,
depending on the number of
characters.
-
Function Set the Speed Dial Function.
Refer to
“How to configure Individual Call
(→page 213)” for information on how to
configure detailed functions.
• No Function
• Individual Call: Make an
individual call.
• Group Call: Make a group call.
• Group Page: Send a group
page.
• All Page: Send an all page.
• Group Message Page: Send a
group message page.
• All Message Page: Send an all
page.
• Monitor: Perform monitoring.
• Network Camera Monitor:
Perform network camera
monitoring.
• Scan Monitor: Perform scan
monitoring. Configure scan
monitoring in
“Scan Monitor
(→page 224)”.
• Option Relay Control: Control
the relay output of another
station. Relay output will not be
controlled for IX-MV, IX-DA, or
IX-BA.
No Function
Entry Description Settings Default values
Station Number Set the destination station. This cannot
be configured for IXW-MA.
3-32 digits -
Priority Set the Priority for the individual calls. • Normal
• Priority
• Urgent
-