Aiphone IX SERIES User Manual

215
Settings and Adjustments
Station programming
4
How to configure All Message Page
Configure this if "All Message Page" is set in “Function (→page 213)”.
How to configure Monitor
Configure if "Monitor" is set in “Function (→page 213)”.
How to configure Network Camera Monitor
Configure if "Network Camera Monitor" is set in “Function (→page 213)”.
Entry Description Settings Default values
Message Select the message (audio file) to send
during all message paging.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom Sound
Registry (→page 172)”.
None
Priority Set the priority of all message page. • Normal
• Urgent
-
Play Count [time(s)] Set the message play count of all
message page.
1 - 20 times -
Entry Description Settings Default values
Station Number Set the destination station. This cannot
be configured for IX-MV7-*, IX-MV, IXW-
MA, or a VoIP Phone.
3-32 digits -
Entry Description Settings Default values
Network Camera Set the destination Network Camera. Select from the registered
network cameras.
-

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom